Composite 30° Seat Rupture Disc

Composite 30° Seat Rupture Disc


The Composite Rupture Disc (Bursting Disc) for a 7I holder has a 30° Seat configuration and consists of two or more metallic or non-metallic components. The components typically consist of a metallic top section and metallic or non-metallic seal, with an optional vacuum support, protective rings, gaskets or outlet liner.

The Composite Rupture Disc is designed for systems requiring a lower burst pressure than offered in Standard discs. Continental Disc Corporation’s seven-hole center pattern is designed for non-fragmentation when used with a fluoropolymer seal.


Nominal Size Range: 1" - 30" (25mm - 750mm)

Burst Pressure Range: 2psig - 1440psig (0,138barg - 99,3barg)

Recommended Operating Ratio: 80% of the rupture disc's rated (stamped) burst pressure.

Seating Configuration: 30° Seat

Service: Liquid or Gas

B.D.I.® Alarm System Compatible?: Yes

ASME Code Symbol Stamp Available? : Yes

Materials not indicated or shown may be available by special design. Contact the factory for more information.


Heat Shield

Heat Shields are typically used to reduce the process temperature to which a rupture disc (bursting disc) is exposed. Heat Shields are used where fluoropolymer or other exotic material liners are required for corrosion resistance or as part of the rupture disc (bursting disc) itself in combination with high process temperature.


Request Info

Please let us know your first name.
Please let us know your company name.
Please let us know your email address.
Please let us know your Primary Phone Number.
Please let us know your message.
Please check the box above.