Assembly and Sub Assembly, Cleanrooms, Hydrocarbon Cleaning, Traceability, Laser Marketing, Shipping

Assembly and Sub Assembly

We can provide individual components to complex mechanical assemblies


Manufacturing environment with a low level of environmental pollutants such as dust, airborne microbes, aerosol particles, and chemical vapors

Hydrocarbon Cleaning

Cleaning of the precision components using hydrocarbon solvents for specialty applications that require it


Record storage for each product, allowing complete traceability, including metallurgy

Laser marking

Ability to laser mark text, images, barcodes and serial numbers on most surfaces

Capable of marking 7” (177mm) wide without splitting


Products supplied by CDC are shipped in packaging materials which conform to the regulations set forth in ISPM-15 (International Standard for Phytosanitary Measures) of the IPPC (International Plant Protection Convention) regulations pertaining to the use of solid wood packaging material in export applications

Custom packaging is developed for special or customer specific applications

Hydrostatic Testing

A non-destructive test for strength and leaks in pressure devices

Helium Mass Spectrometer

A Mass Spectrometer Leak Detector is used for non-destructive leak testing, quantitatively measuring leak rates

1x10-9 ATM cc/sec

Positive Material Identification (PMI)

Analysis of metallic alloys to determine the composition

Highest quality handheld XRF spectrometer

Engineering Lab

Metallurgical capabilities include material specification analysis, organic materials analysis, comparative analysis and corrosion testing

  • Metallographic analysis
  • Weld penetration inspection

Flow Lab

  • National Board & ASME Accepted Testing Laboratory
  • With a response time of milliseconds, CDC’s ASME accepted Flow Test Laboratory is adaptable to run a wide range of flow tests
  • A full range of flow tests in both air and liquid
  • Includes a 16-channel, state-of-the-art high speed data acquisition system capable of reading up to 500,000 samples per second
  • Measurement system that conforms to the stringent testing requirements of ASME Performance Test Codes (PTC-25)
  • Managed and operated by a team of experienced research and development personnel who are ASME accepted authorized observers
  • Presence of an ASME designee may be required for certain types of device testing requiring certification
  • Testing Medium:
    • Air 200 psi @ 7200 scfm
    • Air 650 psi @ 6000 scfm
    • Water 650 psi @ 900 gpm

Laser Cutter

Capable of 2D sheet/plate metal and 3D fabrication of components.

  • Max. Dim. 49”x 49” (1,2m x 1,2m) 2D / 35”x 35”x 13” (,89m x ,89m x ,33m) 3D
  • Max. Workpiece Wt 500lbs (227 kg)
  • 1.5kW output
  • Mild Steel - .5” (12,7mm)
  • Stainless Steel - .120” (3mm)
  • 6 Axis
  • Repeatability Accuracy - X, Y, Z axis .0003
  • A, B, C axis +/- 0.01 degrees

Machine Turning

CNC Lathes - 9 lathes can handle exotic metals

  • max turning diameter 17” (432mm)
  • max length 24” (609mm)
  • max load 550lbs (2250kg)

CNC Milling - 3 axis, max size 22” x 24” x 22” (559mm x 609mm x 559mm)

Coordinate Measuring Machine

Critical for measurement of the precise geometric characteristics of components

Provides statistical process control (SPC) capabilities, is programmable and automated, resulting in the highest level of measurement confidence

Active scanning is a unique feature of this CMM

Navigator technology is used which enables a tangential approach without a stop & go

Capable of circular or helical scanning

Measuring range [dm] 24”x 24”x 12” (609mm x 609mm x 305mm)

Up to 12/24/10 E0 from 1.5 μm

Optical Comparator

Used for small parts which are difficult to accurately measure by manual methods

Enlarged detail, vertical and horizontal measuring capabilities and profile projection allow the precise measurement of features such as radii, thread profile and angles

6” x 6” (152mm x 152mm) max

Clark hardness testers

Digital hardness tester to confirm the exact amount in metals

Capable of circular or helical scanning

Scales - HRB, HRC, HK, HV

Precision borescope inspection

Optical inspection device that is critical for the visual inspection of areas that are not accessible by other means.


Used to measure the profile of a surface, the reading is the equivalent roughness level

Granite Surface Plate

Inspection grade A granite surface plate provides an accurate reference plane for work inspection and layout

Custom designed gaging for your most intricate parts, CDC’s inspectors have all the measuring and test devices necessary to assure that your standards are being met

4’ x 6’ (1.2m x 1.8m) Inspection Grade A

Industrial Oven/Environmental Chambers,Welding, Thermoformers

Conventional 'Traditional' Shop Services

Hydraulic Press(es)

  • 150 ton (136 t) through 1500 ton (1360 t)
  • sizes 22” x 22” x 22” (,5m x ,5m x ,5m) through 60” x 60” x 36” (1,5m x 1,5m x ,9m)

Punch press(es)

  • 2 ton (1.8 t) through 150 ton (136 t)

Industrial Oven / Environmental Chambers

Designed to test the extreme environmental thermo effects on products, materials and components

  • Temperate range 1000 oF (538 oC)
  • Walk-In oven 6’ x 4’ (1.8m x 1.2m)


Nadcap accreditation for welding

Nadcap is the National Aerospace and Defense Contractor Accreditation Program

This accreditation is also recognized in Europe under the auspices of the International Aerospace Quality Group

  • TIG up to 400 amp
  • Auto Machine & Traditional
  • Max diameter 14” (355mm)
  • Max length 20” (508mm) (auto welder)
  • Thin wall .0625” (1.59mm)
  • Thick wall 6” (152mm)


Used for forming plastics and Fluoropolymer into molded shapes

  • Thin gage .002 (.05mm)
  • Thick gage .090 (2.28mm)
  • 5” x .5” (12.7mm x 12.7mm) up to 48” x 48” (1,2m x 1,2m)

Request Info

Please let us know your first name.
Please let us know your company name.
Please let us know your email address.
Please let us know your Primary Phone Number.
Please let us know your message.
Please check the box above.